Parameter attribute
①Diameter of processing bar 500mm (customizable)
②Maximum length of processing bar 500mm (customizable)
③Segment length of processing round bar 2~500 mm
④Speed of diamond wire 0~1500 m/min
⑤Diameter of diamond wire 0.16~0.42 mm
⑥Pay-off wheel: 442D or BS60 (customizable)
⑦Flatness of cutting surface ≤ 0.2mm
⑧Parallelism of cutting ends ≤ 0.8 mm
⑨Cut length error ≤± 0.5 mm
⑩Cutting coolant pressure 0.15-0.3MP; flow 10--20L/min
⑪Air source pressure 0.5-0.7 MP; flow 20 m³/h.
⑫Dimension of equipment: About 5500x2400x2900mm
⑬Rated total power of equipment 15W; Equipment weight: 4.5t
Advantages
①The integrated structure of the whole machine, the cast bottom row, and the number of shims are 10, which increases the overall rigidity and stability of the machine tool;
②The wire tension is controlled by a servo motor and a tension sensor, which reduces the angle of the wire arrangement, and the angle of the wire arrangement wheel is close to 90° (vertical state), which is conducive to the control of the wire arrangement. The cable tension sensor is designed with cable fixing structure, which does not affect the balance of the cable balance wheel during the cable arrangement process;
③The whole machine is controlled with mature wire cutting equipment control system, and the tension control is stable;
④Electrical control is operated on human-computer interface;
⑤With wire speed, main motor temperature, torque, cutting fluid flow detection, alarm, etc.;
⑥The two cutting wheels are driven by electric motors, which increase the cutting capacity of steel wire, with strong cutting function and high cutting capacity.
⑦During the processing of the machine tool, the parameters of the deceleration function and the end position can be changed, the alarm history of the machine tool cannot be changed, the processing data can be transferred through USB interface, and the original data can be automatically updated and overwritten.
⑧The wire management system is designed with mature and reliable mechanical structure, the wires are arranged horizontally, and the tension control adopts the mature and stable control of the slicer;
⑨The bearing boxes of take-up and pay-off reels are located on both sides of the machine tool, directly installed on the integral cast bottom row on both sides of the equipment, which reduces vibration;
⑩The layout of the machine tool has a large space between each component system, which is convenient for maintenance. There is enough space for operation when the take-up and pay-off reels are replaced. The wire management system has only 6 rollers, and the threading of the rollers is simple and convenient.
Lead time
①90 days after advance payment of main equipment
