Parameter attribute
①Model: LMJC-03.
②Suitable for square cells, compatible cell size: Width 160~350mm, height 80~230mm, thickness 20~90mm.
③Cycle time: ≥3PPM.
④First time yield: ≥99.5% (number of defective produtcs / number of all products).
⑤Failure rate: ≤1%
⑥Misjudgment rate: <2%
⑦Equipment size: About 4000*2000*2100mm (L*W*H)
⑧Equipment weight: About 1.2T
⑨Rated power: 10KW.
⑩Power supply: AC380V.
⑪Air pressure: 0.6-0.8 Mpa, the outer diameter of the intake pipe is 12mm.
⑫Air consumption: 0.2L/min (atmospheric dew point≤-30℃ 3, maximum particle diameter≤1μm, maximum particle concentration＜1mg/m³ 4, oil content: ≤5mg/m³).
⑬Control system: PLC.
Advantages
①Compatible with integrated machine for insulation and withstand voltage, dimension measurement, and weighing multi-model modules.
②The detection process is carried out automatically, and all parameters are imported into the MES system.
③The widths of conveyor belt on both sides are easily adjustable, and it is compatible with batteries of different thicknesses.
④The pressure test action strength is adjustable from 50-500kg.
⑤The weighing module is supported by independent small chassis to avoid the impact of vibration, and the measurement accuracy is ±0.1g.
⑥Loading and unloading on the same side of the equipment:
The loading and unloading conveyor belt are on the same side of the equipment to minimize personnel movement.
⑦Two sets of pressing mechanism:
Two sets of pressing mechanisms driven by servo presses are used for withstand voltage insulation tests and dimension tests respectively. The battery movement is driven by high-precision screw rods and servo motors to ensure high speed and precision.
⑧The detection data is bound to the battery QR code and uploaded to the MES system. The equipment is switchable between manual/automatic working mode. The equipment is featured with automatic process control, historical data query and export, real-time display of key parameters, alarm and traceability, and safety protection.
Benefits
①Faster cycle time, suitable for different production modes, and capable of upgrade
②The testing equipment is featured with automatic code scanning, product automatic conveying, product automatic flipping, product automatic handling, automatic detection of voltage insulation, automatic detection of size, automatic measurement of product weight, automatic classification of conforming and non-conforming products, manual loading and unloading, etc.
Lead time
①90 days after advance payment
